SCREWS, anchors, hangers ....
Philips Footprint
Special bit for plasterboard screws:
9.5- 25mm- 35mm- 45mm-55mm-70mm- 80mm-
120mm
25mm screw for plasterboard (One BA6,
BA10, BA13)
Ceiling, lining, partition, framework on frame
35, 45 mm screws for plasterboard (For
two thickness of BA13)
Ceiling hanger P, dubbing, partition frame of frame
70mm screw for wooden frame on
amount
Self-drilling screw (White or black) (Screw of
construction) for rail on upright, rail on
fur, Rail on primer ...
Special self-drilling screw for rigid plates. Fermacell.
Hammer-in anchors length 25 mm diameter 5, special for rail, wall upright on tile joint, earthenware joint glued to brick or rubble, concrete.
Hammer-in anchors length 25 mm diameter 6 for rail mounting on concrete, rubble joint, intermediate supports. Tip for hollow brick, put the plug + a 25 mm plasterboard screw between the plastic and the point of the plug !
hammer-in anchor length 45 mm diameter 6 for the top and bottom (Cleat) on concrete of the honeycomb partition, intermediate support on old wall.
Ceiling fixing
Bindings
The number of fasteners, their section and their spacing depend on the load to be carried.
Their distribution must be such that a defective fastener cannot cause the fall of the frame receiving the cladding elements.
The suspension elements are:
- either arranged and fixed on a single frame suspended from the load-bearing structures;
- or arranged and fixed on a secondary frame made itself integral with a so-called primary frame, which is suspended from the load-bearing structures.
Suspension elements
The suspension elements are metallic, rigid and adjustable, which excludes wire and strap hangers and wooden suspension elements.
They must also have received a treatment against corrosion according to the destination of the room as well as the exposure class requested.
Brass dowel diameter 8, for the top of the threaded rod diameter 6 on concrete, slab
High strength female anchor for concrete
Steel dowel diameter 8, for the top of the threaded rod diameter 6 on concrete, solid slab .
Solid concrete fixing
Drill diameter 8 mm
LEVEL III - PROFESSIONAL COMPANION Position 2
Constable's hat
Fixing for ceiling under slab, floor .....
Connection for the top of the threaded rod, diameter 6mm
Solid concrete fixing
Fixing wooden beam
Fixing wooden beam
Eyebolt, for the top of the threaded rod
diameter 6 on wooden beam
Solid concrete fixing
Steel piton dowel, for the top of the threaded rod diameter 6 on solid concrete slab
No dowel: quick and economical installation.
Reduced drilling diameter (diameter 5mm): time saving.
Screwdriver adjustment: high torque and slow speed
Driving prohibited with a hammer (otherwise no resistance to tearing)
70kg
Factored load with a safety factor of 3 applied.
Fixing wooden beam
Fixing for
beam ceiling
and farmhouse in
wood, to receive
a fur
Two points of
fixing by
hanger (25, 35mm screw)
P hanger (P21, P31 ...)
Maxi 51 cm
In addition to this, you need to know more about it.
The short hanger on a smooth rod is an accessory intended for the realization of suspended ceilings in plasterboard.
It ensures the connection between the fur and the support.
Fixing wooden beam
Solid concrete fixing
Fixing wooden beam
Hinged suspension fixing, on a wooden frame, usable with a threaded rod diam 6 mm or smooth rod diam 4 mm.
The SA line is a
articulated hanger allowing
fixing on a structure
carrier, whatever
the inclination of it. 8
fixing points or fixing
by 2 lag screws. Max load
60kg
For threaded rod of diameter 6
Fixing on slabs
H hanger (claw)
Ceiling fixing under slabs (between the interjoist and the joist) to receive a sleeve. Hammer it in (claw side between you)
Clip support "grips" (toad)
Ceiling beam fixing
metallic, IP M.
Connection for the top of the
threaded shaft,
diameter 6mm.
Maximum load 70kg
Fixing on IPN
Fixing on IPN
Ceiling fixing on metal beam, IP M.
Solid concrete fixing
Metal anchor for suspension under concrete floor with a hooking ring for fixing a smooth rod or a quick hanger.
- Drilling diameter 8 mm
Quick hanger angle hook
closed stainless steel "smooth rod"
Hanger with spring
for false ceilings
Suspension slide, for all types of supporting profiles , to be accompanied by a threaded rod diam 6 mm.
hollow brick
Hollow rubble
Fixing on IPN
Fixing on IPN
Toggle hanger
Fixing for ceiling under brick, hollow rubble.
Connection for the top of the threaded rod, diameter 6 mm.
Multi-purpose steel fastener for under-suspensions
frameworks on metal beams
Ceiling beam fixing
metallic, IP M.
from 2mm to 8mm
Connection for the top of the
threaded rod diameter 6mm, smooth rod.
Maximum load 120kg
Crampon for fixing to the IPN metal beam to receive a threaded rod
diameter 8 mm
Threaded rods diameter 6, length 1 or 2 m
Parallel sleeve for threaded rods.
M8, M10
For quick height adjustment of threaded rods. All you need to do is hold the threaded rods to be assembled side by side and lock them by sliding the connector. The contact between the 2 threads guarantees the connection.
Quick assembly. Possibility of high loads. Possibility of height adjustment after installation.
Suspension jumpers. They allow two furs to be assembled perpendicularly
The long-span VIC 80 profile in galvanized steel is an element intended for the realization of the primary framework of a suspended ceiling.
Connection for threaded rod
diameter 6
Connection for VIC 80
Flexible suspension elements (cable type) can also be used to suspend the primary framework in the context of high plenums.
They must be mechanically adjustable and can only be fixed to the load-bearing elements by a suspension accessory.
Gripple
SRPN fast line for the top of the PSF 70
2 brackets for edge finishing
2 fishplates per fitting
Galvanized hanger PSF 70 for VIC systems
PSF 40
Ceiling fixing on VIC
80 (primary).
Binding: fur (S47 or F530)
by clip sage on PSF 40
FLANGE fixing on VIC 80 (primary)
Connection: by wise clip or rotation on furs (S47 or F530).
Connection for the bottom of the threaded rod .
Maximum load 60 kg
Example of primary framework for the Grand-place site
To make the junction between two
skeleton (fur) using a splint
Ceiling fixing
on concrete beams, for
receive a fur.
The steel strip offers great resistance to breakage and retains its mechanical properties over time.
Advise for the maintenance of very heavy loads. Nut, bolt 10 mm
concrete beam
Acoustic hanger
Load 15 to 25 daN
The hanger on silentbloc, makes it possible to create an acoustic ceiling on a framework.
It benefits from a specific design intended to suppress vibrations.
The hanger is an anti-vibration part for the ceiling
high acoustic performance.
Intermediate support for
doubling on framework
fur (S47 or F530)
Single-adhesive sound insulation tape
for partitions, ceilings ...
Description of an anchor
Drilling diameter | Ankle length (mm) | Maximum thickness of part to be fixed
5x25/5P
5x35/15P
6x30/5P
6x37/12P
6x50/25P
6x65/40P
8x40/10P
5x
5x
6x
6x
6x
6x
8x
25/
35/
30/
37/
50/
65/
40/
5mm
15mm
5mm
12mm
25mm
40mm
10mm
Plastic anchors
Frame anchor knock-in anchor Nylon anchor
Remarkable ease of use
Universal anchor all materials
Easy multi-material fixing
The plastic octopus dowel for all light fixings in electricity, carpentry and decoration
For all types of fasteners in cellular concrete
Drilling for fixing metal and plastic anchors
Drill bit with carbide tip for drilling in concrete
Base material: Concrete, Masonry, Brick, Limestone
Function: Hammer drilling, Non-percussion drilling
Masonry bit for drilling holes primarily in bricks, drywall and lightweight concrete
Connection end: Smooth shank
Function: Hammer drilling, Non-percussion drilling
Metal anchors for heavy loads
HSL expansion screw anchor
HSC-shaped short locking anchor
HST Safety Anchor Stud
The benchmark for heavy fixings
Anchor chamber automatically drilled for special low thicknesses
For the most demanding standards
Insulation program
Plastic insulation nails
Material • Polypropylene • Installation temperature: 0 to + 40 ° C • Not resistant to ultra violet
Fixing of insulation up to 150 mm thick
Fixing of insulation up to 180 mm thick
Fixing insulation up to 120 mm thick
Metal insulation nails
Plastic insulation nails
Fire-resistant fixing for insulating material up to 150 mm thick
For fixing on solid support up to 200 mm thick
Nailer points
Length 15.25.45
For quick fixing of the rail on a screed or slab
Concrete screws
Concrete screws diameter 6, 8, 10, 14 ...
High performance concrete screws. Drill, bellows, screw finished.
Definition of the product
The FIX II anchor from the M8 to M20 range is a galvanized metal anchor which,
after placement in a borehole, is expanded by screwing at controlled torque.
This anchor can only be used in concrete subjected to a dry interior environment.
The provisions of this European Technical Approval are based on
the assumption that the estimated life of the anchor for the intended use is 50 years.
The indications relating to the service life cannot be interpreted as a guarantee.
given by the manufacturer, but should only be considered as a means of choosing
anchors that are suitable for the economically reasonable expected life of the
works.
Wire brush for cleaning the borehole
Anchor anchor for cracked, non-cracked concrete and seismic areas
Definition of the product
The TAPCON 6 concrete screw is a galvanized steel anchor covered with either lamellar zinc (TAPCON-II
or TAPCON-III) or stainless steel (TAPCON-III A4) or highly resistant to
corrosion (TAPCON-III A5). It is available in 6mm sizes. The ankle is screwed into a hole
pre-drilled cylindrical borehole. When screwing in the anchor, its special thread cuts a thread in the
anchor support. The anchoring takes place by mechanical coupling of the special thread.
Intended use
This anchor can be used for anchors that have to meet fire resistance requirements.
This anchor must only be used for making anchors subjected to loads.
static or quasi-static in reinforced or unreinforced concrete of current density,
of resistance classes C20 / 25 minimum to C50 / 60 maximum.
It can be anchored in cracked concrete and in non-cracked concrete.
This anchor can also be used in boreholes filled with a mortar injection
Chemofast CF-T300.
Galvanized steel plug covered with lamellar zinc:
The TAPCON-II or TAPCON-III SPIT concrete screw can only be used in structures subject to
dry interior atmosphere.
Stainless steel dowel:
The TAPCON-III A4 concrete screw can be used in structures subject to
dry indoor environment but also in structures exposed to outdoor environments
(including in marine and industrial environments) or in indoor environments
constantly wet but not subjected to certain aggressive conditions.
Among the latter, we can cite for example a permanent or alternating immersion in water
sea or spray areas, the chlorinated environment of indoor swimming pools or an environment subject to pollution
very high chemical level (desulphurisation units or road tunnels with the use of
defrost).
Highly corrosion resistant steel anchor:
The TAPCON-III A5 concrete screw can be used in structures subject to
dry interior atmosphere but also in structures exposed to atmospheres
outdoor, in constantly humid indoor environments or in certain
aggressive environments. Among these, one can quote for example a permanent immersion or alternating
in seawater or areas of spray, chlorinated swimming pool environment
covered or an environment subject to chemical pollution (desulphurization units or tunnels
roads with the use of de-icing materials).
